The PK-57 Professional Tool Kit is designed as a do it all kit for the home mechanic or as a solid starter kit for the professional shop mechanic, the PK-57 is a very special 57-piece collection of our very finest shop tools. While it includes the tools needed to perform almost any basic repair or adjustment on the bike, the PK-57 also includes the specialty tools to perform many advanced repair tasks, such as installing and removing head cups, installing crown races, cutting fork steerer tubes, straightening derailleur hangers, tapping threaded frame braze-ons, dishing wheels, and more. The box measures approximately 21.5 inches by 12.75 inches by 14 inches, and the kit weighs about 38 pounds. The new PK-57 Professional Tool Kit includes the following:
Contents Include:
Axle Vise AV-1
Cartridge Bottom Bracket Tool for Shimano BBT-2
Bottom Bracket/ Cassette Lockring Tool for CampagnoloBBT-5
Chainring Lockring/ Bottom Bracket Tool BBT-8
Fourth Hand Brake Tool BT-2
Chain Checker Chain Wear Indicator CC-2
Crank Puller (square spindle type) CCP-2
Crank Puller (ISIS Drive and Shimano Octalink type CCP-4
Crank Wrench CCW-14R
Cyclone Chain Scrubber CM-5
Professional Cable Cutter CN-10
Chainring Nut Wrench CNW-1
8 and 10mm Open End Wrench CBW-1
9 and 11mm Open End Wrench CBW-4
Crown Race Setting System CRS-1
Professional Screw Type Chain Tool CT-3
Derailleur Alignment Gauge DAG-1
Cassette Lockring Tool for Shimano FR-5
GearClean Brush GSC-1
Pre-Glued Patch Kit GP-2
36mm Box-End and Bottom Bracket Pin Spanner HCW-4
Double-Sided Bottom Bracket Lockring Tool HCW-5
32mm and 36mm Laser Cut Headset Wrench HCW-15
32mm and 36mm Professional Headset Locknut Wrench HW-2
Bearing Cup Press HHP-2
PolyLube 1000 Grease (tub) PPL-2
P-Handled Hex Wrench Set w/ Holder (7 Piece Set) PH-1
Professional Pedal Wrench PW-4
Headset Cup Remover RT-1
Heavy Duty Shop Apron SA-3
Spoke, Bearing, and Cotter Gauge SBC-1
13mm through 19mm Professional Shop Cone Wrench Set SCW-SET
Threadless Saw Guide SG-6
Professional Sprocket Remover SR-2
Professional Spoke Wrench SW-0
Professional Spoke Wrench SW-1
Professional Spoke Wrench SW-2
3mm by 0.5 Tap for Rear Wheel Dropout Alignment Screws TAP-7
5mm by 0.8 Tap for Water Bottle, Toe Clip, Fender, and Rack Bosses TAP-8
6mm by 1.0mm Tap For Cantilever Brake Bosses TAP-9
10mm by 1.0mm Tap for Derailleur Hanger TAP-10
Tire Boot TB-1
Tire Levers TL-1
Shop Tire Lever TL-10
Threadless Nut Setter TNS-1
Wheel Alignment Gauge (Dishing Tool) WAG-3
